Tips From the Moving Company Pros: Ways To Move a Pinball Device
With pinball making a substantial resurgence across the nation, Mild Giant wishes to ensure that these traditional, lovely machines stay damage-free while being transferred. Oh, and we desire individuals moving them to be safe, too.
Initially glimpse, pinball makers can appear frightening to move because of their weight, fragility, and size. The good news is, our skilled Giants have a few tricks up their sleeves to guarantee your pinball is moved with ease.
Folding Down the Headbox
The bulk of modern pinballs (made in the last 20 years or two) have a hinge system which enables the headbox to be folded down. Early pinball makers had their headboxes bolted on, utilizing either two or four bolts. All Electro-Mechanical pinballs use this system, together with the early Strong State makers.
Later machines have hinges and use a locking system to keep the headbox upright. There might likewise be two bolts inside as added safety, in case the lock is broken or mistakenly un-latched.
For Electro-Mechanical pinball makers, you need to remove the headbox rear access panel to acquire access to the bolts and plugs within. Generally this panel has a lock on it to keep it in place, but in time the key might have been lost. On a regular basis, there is a screw keeping this panel in location.
Once inside, eliminate the bolts and unplug the big adapters that have circuitry decreasing into the machine. You may wish to label these ports to put them back in the best area, however they need to be different sizes, making it difficult to plug back incorrectly.
You can now eliminate the headbox totally, or fold the headbox down onto the playfield glass. Ensure you utilize some foam, heavy cardboard, or blankets to secure the headbox from rubbing on the cabinet. Foam is best, as it will assist keep the back glass in location.
Early Solid State Pinballs
For early Solid State Pinballs, you will need to remove the back glass. There is a lock located on the headbox in among 3 areas: the left-hand side at the top, right-hand side at the leading or on top of the headbox in the center.
Once unlocked, remove the back glass by lifting it up using the lift channel (at the bottom of the glass), and after that pull it out from the bottom.
Then, open the back box light panel by raising the lock situated on either the left-hand side or right-hand side. The panel can now swing out towards you, and give you access to the circuit boards, plugs, and the bolts. Some Gottlieb pinballs require you to lift up the lamp panel in order to swing it open.
Now that you are inside, you can eliminate the bolts, and any plugs that have wires decreasing into the device. You might wish to identify these plugs to put them back in the ideal area. You might not have to get rid of the plugs, as the circuitry needs to be long enough to allow the headbox to be folded down.
At this point, you can lock up the lamp panel and replace the back glass.
Modern Solid State Pinballs
For Data East, Sega, and Stern Modern pinballs, there is a turnable latch system located at the back of the headbox. Using the supplied key, turn the latch 90 ° counter-clockwise.
For Williams, Bally, and Gottlieb, you can easily unlatch the back box at the back of the machine. This is a simple setup and requires no tools.
If you can now fold down the head box onto the cabinet, you're done. Ensure you use some foam, heavy cardboard, or blankets to safeguard the headbox from rubbing on the cabinet. Foam is best, as it will also help keep the back glass in place.
If you can not fold the head box down, then you have to get inside. There is a lock located at the top of the back glass in the center. Use the supplied key to unlock, and eliminate the back glass by lifting it up from the bottom, and then pulling it out from the bottom.
Next, you will have to remove the display panel. You can do this by lifting it up and out. Open the lamp panel. There will be a latch located on either the right-hand or left-hand side. (Some newer Williams and Bally pinballs do not have a separate amp panel, it is part of the back glass panel. And later on Sega and Stern pinballs utilize a fluorescent tube for the back glass lighting).
Eliminate the 2 bolts, put the back box back together, and fold down the head box onto the cabinet. Ensure you use some foam, heavy cardboard, or blankets to safeguard the headbox from rubbing on the cabinet. Foam is best, as it will also help keep the back glass in place.
Removing the Legs.
Pinball Device legs are held in location by eight bolts. The contemporary pinballs have captive nuts or threaded plates inside for the bolts to screw into.
These threaded plates and captive nuts can be harmed, and the usage of additional nuts may have been required. If this is the case, you will need to open up the front door of the pinball, slide out the playfield glass, and raise the playfield.
With the front door (coin door) open, move the lock down bar lock throughout and eliminate the lock down bar. Slide out the playfield glass, and put in a safe place. Next, lift up the playfield by positioning your hand where the ball drains pipes, and raise the playfield up.
You must now have access to any nuts that might have been used. Once any nuts have been removed, change the playfield glass and lock down bar, and lock the front door.
Make certain to mark or keep in mind which legs are for the front and back, as they will be changed differently to suit.
Loading the Pinball.
You are now all set to carry your pinball maker. Prior to you pack it, make sure you remove the pinballs so they don't bounce around throughout transportation.
If you are moving the pinball utilizing a van or SUV, it may be easier to remove the legs simply prior to filling the device. Grab a friend to assist and have one of you supporting the pinball, while the other eliminates the front legs.
Make sure you strap the pinball in, as you do not want it moving if you need to stop unexpectedly!
For Electro-Mechanical pinball devices, you need to remove the headbox rear gain access to panel to get access to the bolts and plugs within. (Some newer Williams and Bally pinballs do not have a separate amp panel, it is part of the back read more glass panel. And later on Sega and Stern pinballs utilize a fluorescent tube for the back glass lighting).
If you are moving the pinball using a van or SUV, it may be much easier to eliminate the legs just prior to loading the maker. Get a pal to have and help one of you supporting the pinball, while the other gets rid of the front legs.